Hear from Our Customers
You flip a switch and the lights come on. Your breaker panel handles everything you plug in without tripping. Your home stays powered during storms because you’ve got backup systems in place that actually work.
That’s what reliable residential electrical services in Coppell, TX should deliver. Not just a temporary fix, but electrical systems that hold up under Texas heat, summer storms, and the demands of modern living.
Most homes in Coppell are pushing electrical systems that were designed for fewer devices, smaller loads, and less stress. Add in smart home tech, EV charging, and multiple high-draw appliances, and you’re asking your wiring to do more than it was built for. The result? Tripped breakers, flickering lights, outlets that don’t work, and real safety risks you can’t ignore.
We handle home electrical repair and installation services that address what’s actually wrong—not just what’s convenient to fix. You get electrical troubleshooting that finds the root cause, repairs that last, and upgrades that give your home the capacity it needs without cutting corners.
We’ve been handling residential electrical services across the Dallas-Fort Worth area since 1999. We’re a family-owned electrical contractor, fully licensed and insured, with an A+ BBB rating and multiple Super Service Awards from Angie’s List.
We know Coppell. We know the mix of newer construction and older homes, the way summer heat spikes demand, and how Texas storms test your electrical system. We’ve worked in your neighborhood, upgraded panels in homes like yours, and installed backup generators after the 2021 freeze showed everyone what happens when the grid fails.
You’re not getting a national chain or a handyman with a voltage tester. You’re getting licensed electricians who’ve spent decades doing this work in your area, who show up on time, explain what’s wrong in plain language, and give you upfront pricing before any work starts.
You call or submit a request online. We schedule a time that works for you—same-day service is available for urgent issues, and we offer 24/7 emergency response when you can’t wait.
Our electrician shows up on time, listens to what’s going on, and runs a full diagnostic. We’re not guessing. We’re testing circuits, checking loads, inspecting panels, and identifying exactly what’s causing the problem.
Before we touch anything, you get a clear explanation of what’s wrong and what it’ll cost to fix it. No surprises, no upselling, no pressure. If you approve the work, we handle it right then in most cases.
Once the job’s done, we test everything, clean up, and walk you through what we did. You get documentation, warranty information, and a system that works the way it should. If something comes up later, we’re a phone call away.
Ready to get started?
We handle electrical panel upgrades for homes that need more capacity or have outdated breaker boxes. If your panel is 15-20 years old or you’re adding major appliances, EV charging, or a backup generator, you likely need an upgrade to handle the load safely.
Home wiring installation covers new circuits, rewiring older sections of your home, and adding dedicated lines for high-draw equipment. Coppell has plenty of homes built in the 80s and 90s where the wiring is still functional but wasn’t designed for today’s electrical demands.
Electrical troubleshooting for homes means we find the actual problem—not just reset a breaker and hope it holds. Flickering lights, warm outlets, burning smells, and frequent trips all point to specific issues that need real fixes, not band-aids.
We also install whole-house surge protection to guard against Texas storm damage, LED lighting upgrades to cut your electric bill, and backup generators so you’re not sitting in the dark when the power goes out. Oncor handles the grid in Coppell, but they can’t prevent outages. A generator can.
Every five to ten years is the standard recommendation, but you should schedule an inspection sooner if you’re buying an older home, adding major appliances, or noticing issues like tripped breakers or flickering lights. Electrical wiring can last 50-70 years if it’s installed correctly and maintained, but that doesn’t mean it’s still safe or adequate for your current needs.
Homes in Coppell built before 2000 often have electrical systems designed for much lower loads than what modern households require. An inspection catches problems before they become safety hazards and identifies whether your panel, wiring, and grounding meet current code standards.
If you’ve never had an inspection and your home is more than a decade old, it’s worth scheduling one. You’ll get a clear picture of what’s working, what’s not, and what upgrades make sense for your situation.
A breaker trips when the circuit is overloaded, there’s a short circuit, or there’s a ground fault. Overloads happen when you’re pulling more power than the circuit can handle—common in kitchens, laundry rooms, and home offices where multiple devices run at once.
Short circuits occur when a hot wire touches a neutral wire, creating a sudden surge that trips the breaker instantly. Ground faults are similar but involve a hot wire contacting a ground wire or metal box. Both are safety mechanisms working as designed, but they point to wiring issues that need attention.
If the same breaker keeps tripping, don’t just keep resetting it. That’s a sign something’s wrong—either the circuit is overloaded and needs to be split, the breaker itself is worn out, or there’s a wiring problem that could lead to bigger issues. A licensed electrician can test the circuit, identify the cause, and fix it properly so it doesn’t keep happening.
If you want to protect expensive electronics, appliances, and smart home equipment from Texas storm damage, yes. Whole-house surge protection installs at your electrical panel and stops voltage spikes before they reach your devices.
Coppell gets its share of summer storms, and power surges can come from lightning strikes, grid switching, or downed lines. A surge doesn’t have to be massive to fry circuit boards in your HVAC system, refrigerator, or computer. Those repairs or replacements cost a lot more than installing a surge protector upfront.
Plug-in surge strips help, but they only protect what’s plugged into them and they’re not designed to handle whole-house surges. A panel-mounted surge protector covers everything in your home and works alongside your breaker panel to divert excess voltage safely. It’s a one-time install that pays for itself the first time it stops a surge from damaging your equipment.
Panel upgrades typically range from $1,500 to $4,000 depending on the size of the new panel, the complexity of the install, and whether any additional work is needed to bring things up to code. If you’re going from a 100-amp panel to a 200-amp panel, expect to be in the mid-to-upper part of that range.
The cost includes the panel itself, labor, permits, and inspection fees. If your home needs rewiring, grounding upgrades, or a new meter base, that adds to the total. We give you upfront pricing before we start so there’s no confusion about what you’re paying for.
A panel upgrade isn’t optional if your current panel is outdated, overloaded, or showing signs of damage like rust, burn marks, or breakers that won’t stay reset. It’s also required if you’re adding a generator, EV charger, or other high-draw equipment that exceeds your current panel’s capacity. Skipping the upgrade means risking electrical fires, failed inspections, and equipment that doesn’t work properly.
You need a licensed electrician. Backup generator installation involves connecting to your home’s electrical panel, installing a transfer switch, running gas or propane lines, and ensuring everything meets local codes and manufacturer specs. It’s not a DIY project unless you’re a licensed electrician yourself.
The transfer switch is critical—it prevents your generator from backfeeding into the grid, which can electrocute utility workers and damage your equipment. Installing it wrong is dangerous and illegal. Coppell requires permits for generator installs, and the work has to pass inspection before it’s approved.
A professional install also ensures your generator is sized correctly for your home’s load, positioned safely with proper clearances, and connected to fuel sources without leaks or code violations. You’ll get warranty protection, documentation for your homeowner’s insurance, and a system that actually works when the power goes out. Cutting corners on the install means you might have a generator that doesn’t start, doesn’t power what you need, or creates safety hazards you didn’t plan for.
A service call addresses a specific problem you’re experiencing—an outlet that doesn’t work, a breaker that keeps tripping, or lights that flicker. We come out, diagnose the issue, and fix it. You’re paying for the repair and the time it takes to complete the work.
An electrical inspection is a comprehensive evaluation of your entire system. We check the panel, test circuits, inspect wiring, verify grounding, and identify any safety issues or code violations. You get a written report that details what’s working, what needs attention, and what upgrades would improve safety or performance.
Inspections make sense when you’re buying a home, planning a major renovation, adding high-draw equipment, or if your home is older and you’ve never had the electrical system evaluated. Service calls are for immediate problems that need fixing now. Both are handled by licensed electricians, but the scope and purpose are different.
