Hear from Our Customers
You flip a switch and the lights come on. Your breakers stop tripping every time you run the microwave and coffee maker at the same time. The outlets in your bathroom and kitchen have proper GFCI protection so your family stays safe from shocks.
That’s what happens when your electrical system actually works the way it should. No more wondering if that burning smell is serious. No more resetting breakers in the middle of dinner. No more worrying about whether your panel can handle one more appliance.
Your home’s electrical system either supports your daily life or constantly interrupts it. When circuit breakers trip frequently, outlets spark, or your panel is still the same 100-amp service from decades ago, you’re dealing with more than an inconvenience. You’re looking at safety risks, failed inspections, and the kind of problems that get worse the longer you wait.
Proper electrical work means your system handles modern electrical loads without issue. It means passing code inspections on the first attempt. It means knowing a licensed electrician in Sansom Park, TX did the job right, pulled the permits, and left your home safer than we found it.
We’ve been handling electrical services in Sansom Park, TX and throughout the Fort Worth area since before most of these code requirements existed. We’re a family-owned electrical contractor, which means you’re not getting a call center or a different crew every time.
Our electricians are fully licensed and insured. We hold an A+ rating with the Better Business Bureau and multiple Super Service Awards because we show up when we say we will and do the work right the first time.
Sansom Park homes—especially the older ones near Jacksboro Highway—weren’t built for today’s electrical demands. We’ve upgraded hundreds of panels in this area, brought outdated wiring up to code, and handled everything from emergency storm damage to whole-house rewires. We know what Fort Worth inspectors look for, what permits you need, and how to get the job done without surprises.
You call or reach out online. We schedule a time that works for you—not just whenever we have an opening. One of our licensed electricians shows up on time, takes a look at what’s going on, and gives you a clear explanation of what needs to happen.
Before any work starts, you get transparent pricing. No hidden fees. No surprise charges after the fact. If permits are required, we handle that. If your panel needs upgrading to meet current code, we walk you through exactly why and what that involves.
Once you approve the work, we get it done. That might mean replacing your old 100-amp panel with a 200-amp service so you can actually use your AC and appliances at the same time. It might mean installing GFCI outlets in your kitchen and bathrooms to meet safety codes. Or it could be tracking down why your breakers keep tripping and fixing the underlying issue instead of just resetting them again.
When we’re finished, the work gets inspected and approved. You’re left with an electrical system that works reliably, meets current safety standards, and doesn’t keep you up at night wondering if something’s about to go wrong.
Ready to get started?
Electrical panel upgrades are one of the most common jobs we handle in Sansom Park, TX. Older homes in this area typically have 100-amp service, which was fine when homes had fewer appliances and no central AC running constantly. Today, that’s not enough. Upgrading to 200-amp service means your system can handle modern electrical loads without constant breaker trips.
Code compliance work is another big one. Fort Worth has specific requirements for GFCI outlets in wet areas, proper grounding, and updated wiring methods. If you’re selling your home or just want to know your family is safe, bringing your electrical system up to current code matters. We handle the permits, do the work to NEC standards, and make sure it passes inspection the first time.
Emergency electrical services are available when you need them. Texas storms knock out power, cause surges, and damage electrical systems. When you’re dealing with a power outage, sparking outlets, or a panel that’s smoking, you need a 24 hour electrician in Sansom Park, TX who can respond fast. We’re available around the clock because electrical emergencies don’t wait for business hours.
Beyond that, we handle outlet installations, lighting upgrades, whole-house surge protection, backup generator installations, and general electrical repairs. If it involves wiring, breakers, or electrical safety, we’ve done it hundreds of times in homes just like yours.
Your panel probably needs an upgrade if your breakers trip frequently, especially when you’re running multiple appliances. That’s your electrical system telling you it can’t handle the load.
Other signs include flickering lights when the AC kicks on, outlets that feel warm to the touch, or a panel that’s over 25 years old. Most older homes in Sansom Park, TX still have 100-amp service, which was standard decades ago but isn’t enough for modern homes with central air, electric dryers, multiple TVs, and all the devices we use daily.
If you’re adding new appliances, finishing a garage, or planning any major electrical work, your panel might need upgrading just to meet code. Fort Worth inspectors won’t approve new electrical work if your existing panel is outdated or unsafe. A licensed electrician can assess your current service, check your panel’s condition, and tell you exactly what you need—not just try to sell you the biggest upgrade.
A licensed electrician has gone through years of training, passed state exams, and carries insurance that protects you if something goes wrong. A handyman might know how to swap out a light fixture, but they’re not qualified to do work that requires permits or involves your home’s electrical system.
In Texas, electrical work that involves your breaker panel, new circuits, or anything that affects your home’s safety requires a licensed professional. If the work isn’t done to code, you’ll fail inspection. If it causes a fire or someone gets hurt, your homeowner’s insurance might not cover it because unlicensed work voids your policy.
When you hire us, you’re getting electricians who are fully licensed and insured. We pull permits when required, follow NEC codes, and guarantee our work passes inspection. That’s not something a handyman can offer, and it’s not worth the risk to save a few dollars upfront.
Panel upgrades in the Fort Worth area typically run between $2,000 and $4,000, depending on your home’s specific situation. That includes the new panel, labor, permits, and inspection fees.
The price varies based on whether your existing wiring can stay or needs updating, how far your panel is from the meter, and whether we need to upgrade the service line coming into your home. Some homes need additional work to bring everything up to current code, which affects the final cost.
We give you transparent pricing upfront before any work starts. You’ll know exactly what you’re paying and why. No surprise charges after the fact. A panel upgrade is an investment in your home’s safety and functionality—it prevents electrical fires, stops constant breaker trips, and ensures your system can handle the demands of modern living. That’s worth doing right the first time.
GFCI outlets prevent electrocution. That’s not an exaggeration. They detect electrical imbalances and shut off power in milliseconds—fast enough to prevent a deadly shock.
Code requires them in bathrooms, kitchens, garages, outdoor areas, and anywhere near water because those are the places where electrical shocks are most likely to happen. If your home was built before these requirements, you probably don’t have them. That means you’re at risk every time you use a hairdryer near the sink or plug something in near the kitchen counter.
Installing GFCI outlets is straightforward work for a licensed electrician in Sansom Park, TX, and it’s one of the most important safety upgrades you can make. If you’re selling your home, inspectors will flag missing GFCI protection. If you’re staying, it’s worth doing for your family’s safety. We install them in the right locations, test them to make sure they’re working properly, and bring your home up to current electrical code.
Don’t just keep resetting it. A breaker that trips repeatedly is doing its job—it’s protecting your home from an electrical problem that could cause a fire.
The issue could be an overloaded circuit, which happens when you’re pulling more power than that circuit can handle. It could also be a short circuit, where wires are touching that shouldn’t be, or a ground fault, where electricity is escaping the circuit. All of these are safety hazards that need to be fixed, not ignored.
Start by unplugging everything on that circuit and resetting the breaker. If it trips immediately, you’ve got a wiring problem. If it stays on until you plug something back in, that appliance or outlet is likely the issue. Either way, if the problem keeps happening, call a residential electrician in Sansom Park, TX to diagnose it properly. We’ll find the root cause, fix it correctly, and make sure your electrical system is safe. That’s a lot better than dealing with a fire or complete power loss down the road.
Yes. Electrical emergencies don’t wait for Monday morning, and neither do we. We offer 24 hour electrician services in Sansom Park, TX for situations that can’t wait.
If your panel is sparking, you’re smelling burning plastic, outlets are smoking, or you’ve lost power after a storm, that’s an emergency. Those situations can escalate quickly into fires or serious safety hazards. You need someone who can respond fast, diagnose the problem accurately, and fix it right—even if it’s 2 a.m. on a Saturday.
We keep our emergency line staffed around the clock. When you call, you’re talking to someone who can dispatch a licensed electrician to your home quickly. We’ve handled everything from storm damage to failed panels to dangerous wiring issues at all hours. You’re not bothering us—this is exactly what emergency electrical services are for, and we’re ready when you need us.
