Hear from Our Customers
You flip a breaker and it trips again. Lights dim when the AC kicks on. Half your outlets don’t work and you’re not sure why. These aren’t just annoyances—they’re signs your electrical system can’t handle what you’re asking it to do.
Most homes in the DFW area built before 1990 weren’t designed for today’s electrical load. You’ve added computers, charging stations, kitchen appliances, and HVAC upgrades. Your panel is doing its best, but it’s overwhelmed.
When you call Carroll Service Co for electrical services in Pantego, TX, you’re getting a licensed electrician who actually diagnoses the problem instead of guessing. We’ll tell you if it’s a simple fix or if your system needs an upgrade to handle modern demands. You’ll know what’s wrong, what it costs, and how long it takes before any work starts.
Carroll Service Co started as a family operation in Fort Worth over 25 years ago. We’re still family-owned, still local, and we’ve worked on everything from older homes near Bicentennial Park to newer construction across Pantego, TX.
Our residential electrician team is fully licensed and insured. We hold an A+ rating with the BBB and multiple Super Service Awards because we show up when we say we will and stand behind every job with warranty coverage on parts and labor.
Pantego sits right between Dallas and Fort Worth, which means you’re in lightning alley. Storms roll through and power surges damage equipment. We’ve installed whole-house surge protection and backup generators across town because people here know what it’s like to lose power during Texas weather.
You call or submit a request online. We’ll ask a few questions about what’s happening—breaker trips, flickering lights, outlets not working, whatever the issue is. If it’s an emergency, we typically respond within 1-2 hours. For scheduled work, we’ll set a time that works for you.
When our commercial electrician or residential electrician arrives, they’ll assess your system and explain what’s going on in plain terms. You’ll get transparent pricing before any work begins. No surprises when the job’s done.
If your home needs wiring installation in Pantego, TX, or an electrical panel upgrade, we’ll walk you through what that involves. We handle all permit applications and inspections because that’s part of doing the job right. Once the work is complete, you’ll have code-compliant electrical work that passes inspection and a system that can handle what you’re plugging into it.
Ready to get started?
Carroll Service Co handles electrical maintenance in Pantego, TX, for both homes and businesses. That includes safety inspections, breaker panel installations, recessed lighting design and installation, whole-house surge protection, and backup generator installations.
If you’re dealing with constant breaker trips, that’s usually a sign your panel is overloaded. An electrical panel upgrade in Pantego, TX, gives you the capacity to run modern appliances without shutting down half your house. We use commercial-grade components and UL-listed parts that last decades longer than standard residential materials.
For older homes, home rewiring services in Pantego, TX, might be necessary if your wiring is outdated or not up to current code. Aluminum wiring, knob-and-tube, or cloth-wrapped wiring can all create safety hazards. We’ll assess what you’re working with and recommend the right solution.
Texas will adopt the 2026 National Electrical Code this September, which means code requirements are changing. Our team stays current on all NEC codes and local Fort Worth requirements so your work meets today’s standards and tomorrow’s inspections.
Yes, most electrical work that changes your system requires a permit—not just major projects. That includes panel upgrades, new circuits, outlet additions, and rewiring. Pantego follows Texas electrical codes, and permits ensure the work meets safety standards.
Some homeowners think they’re exempt from permits if they do the work themselves. That’s not true. Texas has a “Homeowner Exemption” that allows you to do your own electrical work, but you’re still required to pull permits and pass inspections. You also assume full responsibility if something goes wrong, which can affect your insurance coverage or home sale down the road.
As a licensed electrical contractor in Pantego, TX, we handle all permit applications and inspections for you. That protects you from code violations and ensures the work is done safely and legally.
If your breakers trip frequently, lights dim when appliances turn on, or you’re using extension cords because you don’t have enough outlets, your panel probably can’t handle your electrical load. Most homes built before 1990 have 100-amp or 150-amp panels, which aren’t designed for modern electrical demands.
Today’s homes need at least 200 amps to run HVAC systems, kitchen appliances, electronics, and charging stations without overloading circuits. An electrical panel upgrade in Pantego, TX, gives you that capacity and adds safety features like arc-fault and ground-fault circuit interrupters that older panels don’t have.
During an inspection, we’ll check your panel’s age, capacity, and condition. If it’s outdated or showing signs of wear—like rust, burning smells, or warm breaker switches—it’s time for an upgrade. We’ll give you a clear recommendation based on what your home actually needs.
Home rewiring replaces old or unsafe wiring with new wiring that meets current electrical codes. This is common in older homes with aluminum wiring, knob-and-tube wiring, or cloth-wrapped wiring that’s deteriorated over time. These materials can create fire hazards or fail to deliver consistent power.
The process involves running new wiring through your walls, attic, or crawl space, then connecting it to your panel and outlets. We’ll also upgrade outlets, switches, and fixtures as needed. The scope depends on your home’s size and how much wiring needs replacement—sometimes it’s a few circuits, sometimes it’s the whole house.
Rewiring requires permits and inspections, which we handle. The work is disruptive because we need access to walls, but we’ll walk you through what to expect and keep the job moving efficiently. Once it’s done, you’ll have a safer, more reliable electrical system that can handle modern loads.
Electrical work costs vary based on the job’s complexity, materials, and time required. In the Fort Worth area, hourly rates for licensed electricians typically range from $35 to $53, but most contractors price by the job rather than the hour so you know the total cost upfront.
A simple repair like replacing an outlet might cost $100-$200. An electrical panel upgrade in Pantego, TX, usually runs $1,500-$3,000 depending on the panel size and whether we need to upgrade your service line. Full home rewiring can range from $3,000 to $10,000+ depending on your home’s size and wiring condition.
We provide transparent pricing before starting any work. You’ll get a detailed estimate that breaks down labor, materials, and permit fees. No hidden charges, no surprises when the job’s done. If we find additional issues during the work, we’ll discuss them with you before proceeding.
Yes, especially in Pantego. You’re located in what’s known as lightning alley—the area between Dallas and Fort Worth sees more electrical storms than most parts of the country. Lightning strikes and power surges from the grid can damage electronics, appliances, and HVAC systems.
A whole-house surge protector installs at your electrical panel and protects everything connected to your system. It’s different from power strips, which only protect individual devices. Whole-house protection stops surges before they reach your equipment, which can save you thousands in replacement costs after a storm.
Installation takes a few hours and costs significantly less than replacing a fried HVAC system or damaged electronics. Given Pantego’s weather patterns and the cost of modern appliances, it’s one of the smartest upgrades you can make. We install surge protection systems that meet UL standards and come with warranty coverage.
Texas allows homeowners to perform electrical work on their own property under the Homeowner Exemption. But that doesn’t mean you should. You’re still required to pull permits, follow electrical codes, and pass inspections. If the work doesn’t meet code, you’ll need to hire a licensed electrician to fix it before it passes.
More importantly, you assume full responsibility for any problems that result from your work. If faulty wiring causes a fire, your insurance may not cover the damage. If you sell your home and the buyer’s inspector finds unpermitted or substandard electrical work, it can kill the sale or force you to pay for corrections.
Electrical work requires precision and knowledge of local codes. As a licensed electrician in Pantego, TX, we have the training, tools, and insurance to do the job safely and legally. We handle permits, inspections, and warranty coverage so you’re protected. For most homeowners, that peace of mind is worth the cost.
