Hear from Our Customers
You flip a switch and the lights come on. Every time. You run the microwave while the AC is going and nothing trips. Your family is safe because your panel isn’t overheating in the garage.
That’s what a properly functioning electrical system looks like. No flickering lights when appliances kick on. No hot outlets. No breakers that trip every time you try to use two things at once.
Most homes in Kennedale were built before electrical demands doubled. Your 100-amp panel that worked fine in 2010 is now struggling under the weight of smart home devices, multiple laptops, EV chargers, and modern HVAC systems. When your system can’t keep up, you’re not just dealing with inconvenience—you’re looking at potential safety hazards and rising energy bills from inefficient equipment working overtime.
A licensed electrician in Kennedale, TX can assess what your home actually needs, upgrade your capacity to handle modern loads, and give you the peace of mind that comes from knowing your electrical system is safe and reliable.
We’ve been serving the Dallas-Fort Worth and Mid-Cities areas since 1999. We’re a family-owned electrical contractor with an A+ BBB rating and multiple Super Service Awards from Angie’s List.
Every electrician on our team carries current Texas licensing and insurance. We’ve handled everything from simple residential repairs to complex commercial installations across Tarrant County, including right here in Kennedale.
We know what North Texas homes deal with—aging electrical infrastructure that wasn’t built for today’s demands, storm damage from severe weather, and the challenge of keeping power reliable during summer heat waves and winter freezes. That’s the reality for the 8,500+ residents in Kennedale, and we’ve been helping homeowners and business owners navigate it for over two decades.
First, we listen. You tell us what’s happening—breakers tripping, lights flickering, outlets that feel warm, or you’re planning an addition and need more capacity. We ask questions to understand the full picture.
Then we come out and assess your system. We look at your panel, check your wiring, test circuits, and identify what’s causing the problem or what you’ll need for the upgrade. You get transparent, upfront pricing before any work starts. No surprises when the job’s done.
Once you approve, we schedule the work at a time that fits your life. Our team shows up on time, completes the job with commercial-grade materials and UL-listed parts, and cleans up afterward. Every project includes detailed warranty coverage on both parts and labor.
For emergency electrical services in Kennedale, TX, we respond fast—often within twenty minutes—because we know electrical issues can become serious emergencies quickly. You shouldn’t have to wait days when your family’s safety is on the line.
Ready to get started?
You get a full electrical safety inspection, whether you’re dealing with a repair or planning an upgrade. We check for outdated panels like Federal Pacific or Zinsco that have high failure rates, look for code violations that could affect your insurance or resale value, and identify any immediate safety concerns.
For panel upgrades, we handle the full scope—from pulling permits to coordinating with your utility provider. A standard 200-amp panel upgrade in the DFW area runs between $2,800 and $4,500 in 2026, depending on your home’s specific needs and whether we’re also updating circuits or adding capacity for EV charging.
Kennedale homeowners are increasingly asking about electrical troubleshooting for smart home integration and wiring installation for electric vehicle charging stations. We design systems that handle today’s loads and give you room to grow. If you’re planning to add solar panels or battery storage down the road, we’ll make sure your electrical infrastructure can support it.
Our commercial electrician services in Kennedale, TX cover everything from routine maintenance to complete electrical system design for new construction. We use the same commercial-grade components for residential projects because they last decades longer than standard materials.
You’re resetting breakers regularly. That’s the most obvious sign. If you can’t run the microwave and vacuum at the same time without tripping a breaker, your panel is overtaxed.
Other red flags include flickering lights when the AC kicks on, outlets that feel warm to the touch, or a burning smell near your panel. If your home was built before 1990, there’s a good chance your electrical system wasn’t designed for modern loads—smart thermostats, security cameras, multiple computers, and high-efficiency HVAC systems all draw more power than older homes were wired to handle.
Insurance companies in Texas are also refusing to write policies on homes with outdated panels or requiring replacement within 30 days of closing. If you have a Federal Pacific or Zinsco panel, you’re looking at a safety hazard—breakers in these older panels often fail to trip during overloads, which can cause electrical fires. A licensed electrician can inspect your panel and tell you exactly what you’re working with.
Full home rewiring varies widely based on your home’s size, age, and how accessible your wiring is. You’re looking at anywhere from $8,000 to $15,000+ for a complete rewire of an average-sized home in Kennedale, TX.
Partial rewiring—like updating a kitchen or adding circuits for a home office—costs less. Sometimes you don’t need a full rewire, just targeted upgrades to problem areas or additional circuits to handle new loads.
The real question is what your home actually needs. Older homes with knob-and-tube wiring or aluminum wiring need attention. Homes that have had multiple additions over the years often have a patchwork of different wiring standards that create safety issues. A thorough electrical inspection will show you what’s urgent, what can wait, and what your options are. We give you upfront pricing before starting any work, so you can make an informed decision without pressure.
Most residential panel upgrades take one full day, sometimes stretching into a second day depending on the complexity. Your power will be off during portions of the work—usually 4 to 8 hours total.
We coordinate with Oncor (the utility provider for Kennedale) to disconnect and reconnect your service. That’s required by code and ensures everything is done safely. You’ll want to plan accordingly—charge devices beforehand, maybe grab lunch out, and know that refrigerated items will be fine for the few hours your power is off.
If we’re also adding circuits, upgrading your meter base, or doing additional electrical work at the same time, it might take longer. We’ll give you a clear timeline upfront so you can plan your day. For commercial electrical projects, timing is more flexible since we can often work after hours to minimize disruption to your business operations.
Yes, for most electrical work beyond simple repairs. Panel upgrades, new circuits, wiring installation, and any work that involves opening walls all require permits from the City of Kennedale.
Permits aren’t red tape—they ensure the work meets current electrical code and gets inspected by someone who isn’t the person doing the work. That protects you. When you go to sell your home, unpermitted electrical work can kill a deal or force you to rip it out and redo it properly.
We pull all necessary permits as part of our service. It’s included in your project cost, and we handle the inspection scheduling. Every electrician in Texas must hold a license from the Texas Department of Licensing and Regulation (TDLR)—you should see that TECL number displayed on trucks, uniforms, and estimates. If someone offers to do electrical work without permits or licensing, you’re taking on serious liability and safety risk.
Stop using that outlet or circuit immediately. Don’t try to investigate further on your own. A burning smell means something is overheating—wiring, connections, or components that are failing.
If the smell is coming from your electrical panel, turn off the main breaker if you can do so safely, then call an emergency electrician right away. Electrical fires often start inside walls or panels where you can’t see them until it’s too late.
For outlets, unplug anything connected and don’t use that outlet until it’s been inspected and repaired. Hot outlets, discolored cover plates, or any visible sparking are all signs of dangerous wiring issues that need immediate attention from a licensed electrician in Kennedale, TX. We respond to electrical emergencies quickly because we know these situations can escalate fast. Your safety isn’t something to gamble with.
Yes, and it’s one of the smartest investments you can make for your home. Whole-house surge protection installs at your electrical panel and protects every device and appliance in your home from power surges caused by lightning strikes, grid fluctuations, or even your own AC unit cycling on and off.
North Texas gets severe storms. One lightning strike near your home can send a surge through your electrical system that fries electronics, damages appliances, and shortens the lifespan of anything plugged in. Those small power strips you buy at the store offer minimal protection—they’re designed for minor surges, not the major voltage spikes that come from storms or utility issues.
A whole-house surge protector costs a fraction of what you’d spend replacing a refrigerator, HVAC system, computer, and TV after a major surge event. Installation takes a few hours and integrates directly with your panel. We install commercial-grade surge protection that actually works when you need it. Given how much money you have invested in electronics and appliances, it’s cheap insurance that pays for itself the first time it stops a surge from destroying your equipment.
