Hear from Our Customers
Your breakers stop tripping every time you run the dryer and microwave at once. Your panel can handle the load your 1990s-era home was never designed for—EV chargers, smart home systems, multiple AC units running through a Texas summer.
You’re not wondering if that flickering light is a fire hazard. You’re not calling someone back to fix what should’ve been done correctly the first time.
The work passes inspection on the first attempt because it’s done to current NEC codes and Fort Worth electrical requirements. Your homeowner’s insurance doesn’t flag outdated wiring. And if you ever sell, the electrical system is an asset, not a liability that tanks your appraisal.
Most homes in Bartonville were built around 1991. That’s over 30 years of wear on systems that weren’t designed for how you live now. Upgrading your electrical panel from 100 amps to 200 amps isn’t about keeping up with the neighbors—it’s about safety, reliability, and not losing power when you need it most.
We’ve been handling residential and commercial electrical work across the Dallas-Fort Worth area since before Bartonville became the affluent community it is today. We’re locally owned, fully licensed by the Texas Department of Licensing and Registration, and we carry an A+ rating with the Better Business Bureau.
We’ve earned multiple Super Service Awards from Angie’s List because we show up when we say we will, quote the job upfront, and don’t leave until it’s done right. No surprises on the invoice. No cutting corners to save 20 minutes.
Bartonville homeowners deal with aging electrical systems in high-value properties. You’re not looking for the cheapest bid—you’re looking for someone who understands what’s at stake when the median home value is $849,300 and your family’s safety depends on the work being done correctly.
You call or submit a request. We schedule a time that works for you—often same-day if it’s urgent.
Our licensed electrician shows up in a fully stocked service vehicle. We assess the issue, explain what’s wrong in plain language, and give you an upfront price before any work starts. No hourly rate that climbs while you watch.
If it’s a panel upgrade, we pull the necessary permits, install NEMA-rated components and UL-listed materials, and coordinate the inspection. If it’s troubleshooting a circuit issue, we trace the problem, fix it, and test the system to make sure it’s resolved. If it’s a generator installation, we size it correctly for your home’s load, install it to manufacturer specs, and walk you through how it operates.
Most repairs get completed during the first visit because we stock common parts. Larger jobs like home rewiring services or electrical panel upgrades in Bartonville get scheduled with clear timelines, and we clean up when we’re done. You get a detailed warranty on the work, and if you have questions later, you call the same number and reach someone who knows your property.
Ready to get started?
Electrical maintenance isn’t glamorous, but it’s what keeps your home safe. Regular inspections every 5-10 years catch problems before they become fires. We check for faulty wiring, outdated panels, overloaded circuits, and improper grounding—all common issues in homes built in the early 90s.
Panel upgrades in Bartonville typically involve moving from 100-amp service to 150 or 200 amps. That’s not just about capacity—it’s about having the right breaker protection, proper load balancing, and a system that won’t fail during a summer heat wave when everyone’s AC is maxed out. We handle the permit, the utility coordination, and the inspection.
Whole-home surge protection is another layer most people skip until a lightning strike fries their appliances. North Texas storms are no joke. A surge protector installed at the panel protects everything downstream—HVAC, computers, kitchen appliances, entertainment systems. It can also lower your electric bill by up to 15% by reducing phantom power draw.
Generator installation has become standard for Bartonville homeowners who’ve lived through multi-day outages. We size the unit based on your actual load requirements, install it with an automatic transfer switch, and make sure it kicks on within seconds of losing grid power. You’re not scrambling for hotel rooms or throwing out a fridge full of food.
Panel replacement in Texas generally runs between $1,800 and $4,000, with most jobs landing in the $2,000 to $3,500 range. The final cost depends on whether you’re upgrading from 100 to 150 amps or going to 200, how accessible your current panel is, and whether your utility requires a meter base replacement.
We give you a written estimate before starting. That includes the panel itself, all breakers, labor, permits, and the inspection fee. If your home has aluminum wiring or needs additional grounding work, that gets quoted separately so there’s no confusion.
A panel upgrade isn’t optional if you’re adding a generator, EV charger, or a second AC unit. Your existing system can’t handle the load, and trying to make it work is how you end up with tripped breakers, overheated wiring, and potential fire hazards.
Texas law requires a licensed electrical contractor for any major electrical work, including panel replacements, home rewiring services, and generator installations. You’re exempt from needing a license to work on your own home, but you’re not exempt from permits. If the city requires a permit, you still have to pull one and meet the same safety standards.
Here’s the bigger issue: your homeowner’s insurance can deny a claim if a fire or electrical failure was caused by unpermitted or improperly installed work. If you ever sell, a home inspector will flag code violations, and you’ll either pay to fix it or lose the sale.
Electrical troubleshooting and repairs aren’t YouTube projects. One mistake with a 200-amp panel can kill you. Even if you know what you’re doing, a licensed electrician carries liability insurance, pulls permits correctly, and gets the work inspected so it’s done to code. That’s not just paperwork—it’s your family’s safety and your home’s value.
Every 5 to 10 years is the standard recommendation, but if your home was built in the early 1990s—like most in Bartonville—you should have it checked sooner. Electrical systems degrade over time. Connections loosen, insulation breaks down, and panels that were fine 30 years ago can’t handle modern electrical demands.
You should also schedule an inspection if you’re buying a home, adding major appliances, experiencing frequent breaker trips, or noticing flickering lights, burning smells, or outlets that feel warm to the touch. Those are all signs of underlying issues that won’t fix themselves.
An inspection covers your panel, wiring, grounding, GFCI and AFCI protection, and overall load capacity. We identify fire hazards, code violations, and anything that could fail during the next storm. It’s a few hundred dollars that can prevent a five-figure insurance claim or a total loss.
A plug-in surge protector handles small surges from your home’s internal electrical fluctuations. It might save your computer if the AC compressor kicks on and causes a voltage spike. But it won’t do anything against a lightning strike or a utility-level surge that comes through the main service line.
Whole-home surge protection gets installed at your electrical panel and protects every circuit in your house. When a major surge hits—from lightning, downed power lines, or grid switching—the system diverts the excess voltage to ground before it reaches your appliances, HVAC, electronics, and wiring.
North Texas sees frequent thunderstorms, and power surges are a leading cause of appliance failure and electrical fires. A whole-home system costs a few hundred dollars to install and can save thousands in damaged equipment. Some insurance companies even offer discounts if you have one installed, and it can reduce your overall energy consumption by cutting phantom loads.
Most residential generator installations take one to three days, depending on the size of the unit, how far it sits from your electrical panel and gas line, and whether we need to pour a concrete pad. We handle the entire process—sizing the generator based on your home’s load, coordinating with the utility if needed, running the gas line, installing the automatic transfer switch, and testing the system.
You’ll need a permit, and the work has to pass inspection. That’s not red tape—it’s making sure the generator actually works when the power goes out and doesn’t backfeed into the grid, which can kill a lineman trying to restore service.
Generators aren’t cheap, but if you’ve lived through a multi-day outage in a Texas summer or winter freeze, you know what it costs to lose power. Your refrigerator, HVAC, medical equipment, and security system stay online. You’re not scrambling for hotel rooms or dealing with burst pipes because your heat went out. It’s an investment in reliability, and it increases your home’s resale value.
Yes. We’re licensed for both residential and commercial electrical services in Bartonville and across the DFW area. Commercial work involves different code requirements, load calculations, and equipment, but the fundamentals are the same—safe, reliable electrical systems installed to current standards.
For residential clients, that means panel upgrades, wiring installation, generator hookups, lighting design, and electrical maintenance. For commercial clients, it’s tenant build-outs, service upgrades, code compliance work, and troubleshooting electrical issues that impact business operations.
We’ve been doing this for over 25 years, so we’ve seen just about every electrical scenario you can run into. Whether it’s a home in Lantana or a commercial property in the Bartonville area, the approach is the same—show up on time, quote it honestly, do the work right, and make sure it passes inspection the first time.
