Hear from Our Customers
Your breakers stop tripping every time you run the AC and microwave together. Your panel handles the load your home actually needs—not what it needed in 1985. You flip a switch and the lights come on, every single time.
That’s what happens when your electrical system is set up correctly. No more resetting breakers in the garage. No more wondering if that burning smell is normal. No more calling someone back because the work didn’t pass inspection.
You get a system that works the way it should. And when something does go wrong, you have someone who picks up the phone and shows up the same day—not next week when your schedule clears.
We’ve been serving Richland Hills, TX and the DFW Mid-Cities since before most electrical contractors in the area even existed. That’s 25 years of knowing exactly which permits apply to your property, which inspectors cover your area, and what actually goes wrong in homes built during the North Texas growth boom.
We’re family-owned, fully licensed, and we carry an A+ BBB rating because we do the work right. Not fast. Not cheap. Right. That means your project passes inspection on the first attempt, your invoice matches the estimate, and you’re not dealing with callbacks six months later.
We’re not the biggest electrical company in Richland Hills, TX. We’re the one that’s still here because we show up, do what we say, and don’t leave until it works.
You call or submit a request. We ask what’s going on and schedule a time that actually works for your schedule—usually same-day or next-day for most service calls in Richland Hills, TX.
Our electrician shows up in a fully stocked truck. That matters because most repairs get finished during the first visit when we’re not waiting on parts. We assess the issue, explain what’s wrong in plain terms, and give you a flat-rate price before any work starts. No surprises on the invoice.
Then we fix it. If permits are required, we pull them. If inspections are needed, we schedule them and make sure everything passes the first time. You’re not dealing with the city or chasing down paperwork—we handle that.
When the job’s done, we test everything, clean up, and walk you through what we did. Then we leave. That’s it.
Ready to get started?
Every electrical job we handle in Richland Hills, TX includes a licensed electrician who’s been doing this for years—not someone fresh out of trade school learning on your property. You get commercial-grade components and UL-listed parts that last, not the cheapest option from the supply house.
We pull permits when required and coordinate inspections with the city. That’s not optional. Richland Hills follows the 2023 National Electrical Code, and we make sure your work meets those standards so you don’t get flagged during a home sale or insurance claim.
Your project also includes upfront pricing with no hidden fees. The estimate we give you is what you pay unless you ask us to do additional work. And if something comes up mid-job, we stop and talk to you before moving forward.
You also get access to our emergency line. If your panel starts sparking at 9 PM or a storm knocks out power to half your house, you’re not waiting until Monday. We respond fast because electrical emergencies in Texas heat aren’t just inconvenient—they’re dangerous.
Panel upgrades in Richland Hills typically run between $1,800 and $3,200 depending on your home’s size, the amperage you need, and how much rewiring is involved. That price includes the new panel, circuit breakers, permits, inspections, and labor.
Most homes built before 2000 have 100-amp panels. If you’re adding central AC, a home office with multiple computers, or an EV charger, that panel can’t handle the load. Upgrading to a 200-amp panel gives you the capacity for modern electrical demands without constantly tripping breakers.
We provide a detailed estimate before starting any work. You’ll see exactly what you’re paying for—no line items that just say “labor” or “materials.” And if your home needs additional work like rewiring or grounding upgrades to meet current code, we’ll explain why and what it costs before moving forward.
Yes. Texas requires anyone doing electrical work for hire to hold a current electrical contractor license issued by the Texas Department of Licensing and Regulation. That’s not just a formality—it means the person working on your property has passed exams, carries insurance, and is legally accountable for the work.
Unlicensed electricians are cheaper for a reason. If their work causes a fire, fails inspection, or creates a safety hazard, you have no recourse. Your homeowner’s insurance may not cover damage caused by unpermitted or unlicensed work. And when you go to sell your home, unpermitted electrical work can kill the deal or force you to pay for costly rework.
We hold a valid Texas electrical contractor license and comprehensive liability insurance. That protects you if something goes wrong. It also means we know current NEC codes, local Richland Hills requirements, and how to pull permits correctly so your work passes inspection the first time.
Overloaded panels top the list. Most homes in Richland Hills built in the 80s and 90s have 100-amp service. Add modern HVAC, kitchen appliances, home offices, and EV chargers, and that panel is maxed out. You’ll see frequent breaker trips, flickering lights, or outlets that stop working.
Outdated wiring is another big issue. Aluminum wiring was common in the 70s and early 80s, but it expands and contracts with temperature changes, leading to loose connections and fire risk. Knob-and-tube wiring in older homes isn’t grounded and can’t handle today’s electrical loads.
Code violations show up during home inspections or remodels. Missing GFCI outlets in bathrooms and kitchens, improper grounding, overloaded circuits, and DIY wiring that doesn’t meet NEC standards. These aren’t just technicalities—they’re safety hazards that can cause fires, shocks, or power failures.
Most service calls and repairs get finished the same day. If your breaker keeps tripping, an outlet stopped working, or you need a ceiling fan installed, we typically complete that work during the first visit. Our trucks carry common parts and materials so we’re not making return trips.
Panel upgrades usually take one full day, sometimes two if your home needs significant rewiring or if we’re waiting on a city inspection. We schedule the work so you’re not without power overnight. Generator installations take one to two days depending on the size of the unit and how much transfer switch work is involved.
Larger projects like whole-home rewiring or commercial electrical work get scheduled in phases. We’ll give you a realistic timeline upfront and keep you updated if anything changes. Permit approval and inspection scheduling can add a few days to the overall timeline, but we handle all of that coordination so you’re not chasing down the city.
If you see sparks, smell burning, or notice smoke coming from an outlet or panel, shut off power at the main breaker and call us immediately. Don’t try to investigate or fix it yourself—electrical fires spread fast and electrocution risk is real.
If a breaker trips and won’t reset, don’t force it. That breaker is doing its job by cutting power to a circuit that’s overloaded or shorted. Forcing it back on can cause overheating and fire. Call us and we’ll diagnose the issue safely.
For power outages affecting just your home during a storm, check your main breaker first. If it’s tripped, reset it once. If it trips again, leave it off and call us. That indicates a bigger problem that needs professional attention. We offer 24/7 emergency electrical service in Richland Hills, TX because we know electrical problems don’t wait for business hours.
If we do the work, yes. We follow the 2023 National Electrical Code and local Richland Hills requirements on every job. That’s not optional—it’s how we operate. Our electricians know what inspectors look for and we make sure everything is installed correctly, grounded properly, and documented with the right permits.
Failed inspections usually happen when unlicensed contractors cut corners or homeowners attempt DIY electrical work without understanding code requirements. Common failures include improper wire sizing, missing junction box covers, incorrect GFCI placement, and overloaded circuits. These aren’t just technicalities—they’re safety issues.
When we pull a permit for your project, we coordinate the inspection and make sure someone is available to meet the inspector if needed. If something does get flagged—which is rare—we fix it immediately at no additional cost. You’re not paying twice for the same work or dealing with reinspection fees.
