Hear from Our Customers
Your breaker shouldn’t trip every time you run the dryer. Your lights shouldn’t flicker when a storm rolls through. And you definitely shouldn’t wonder if your electrical panel can handle what you’re asking it to do.
Oak Point homes deal with the same grid strain hitting all of North Texas. ERCOT’s pushing capacity limits, severe weather knocks out power for days, and older homes weren’t built for the electrical load modern families need. That’s not a sales pitch—it’s what’s happening.
When you call an electrical company in Oak Point, TX, you’re looking for someone who understands what’s at stake. Your family’s safety. Your home’s value. Your ability to keep the lights on when the grid fails. We handle electrical repairs, panel upgrades, whole-house surge protection, and backup generator installations because those are the services that actually solve the problems you’re facing right now.
We’ve been working in the Dallas-Fort Worth area since before Oak Point’s population boom. We’ve seen what happens when electrical systems can’t keep up with growth, and we’ve upgraded hundreds of panels to handle it.
We’re a family-owned electrical contractor, which means we’re not handing your job to whoever’s available. Our electricians are licensed, insured, and trained on Texas codes—because passing inspection the first time saves you time and money. Our A+ BBB rating and multiple Super Service Awards didn’t come from cutting corners.
Oak Point sits in a part of Denton County where CoServ and Oncor both operate, energy costs keep climbing, and storm season brings real risk. We’ve been responding to those conditions for over two decades, and we know what works.
You call or submit a request. We ask what’s going on, schedule a time that works for you, and show up when we say we will. If it’s an emergency, we respond same-day—because electrical problems don’t wait for business hours.
Our electrician assesses the situation, explains what’s wrong in plain terms, and gives you a clear price before any work starts. No surprises. No upselling services you don’t need. If your panel’s outdated or your wiring’s unsafe, we’ll tell you why and what it takes to fix it.
We handle permits, inspections, and code compliance. You don’t have to chase down approvals or wonder if the work meets current standards. Once the job’s done, we test everything, clean up, and walk you through what we did. Then we’re available if you have questions later—because electrical work should give you peace of mind, not more stress.
Ready to get started?
Electrical repairs cover everything from outlets that stopped working to circuits that keep tripping. We troubleshoot the root cause instead of slapping a temporary fix on it. If your home’s wiring is outdated or damaged, we replace it with materials that meet current code and last.
Panel upgrades are critical in Oak Point because most older homes weren’t designed for modern electrical demands. Adding EV chargers, HVAC upgrades, or home offices means your panel needs capacity it might not have. We install panels that handle your current load and give you room to grow. Cost typically runs $1,800 to $3,200 depending on your setup, and the investment pays off in safety and functionality.
Whole-house surge protection matters here. North Texas sees frequent lightning strikes and grid fluctuations that fry electronics and appliances. A surge protector at your panel guards everything in your home—not just what’s plugged into a power strip. Backup generators keep your power on when the grid goes down, which happens more often than it should in Texas. We install systems that kick in automatically, so you’re not scrambling in the dark during the next outage.
If your breakers trip frequently, your lights dim when appliances run, or your panel is over 25 years old, you likely need an upgrade. Most homes built in the 1960s and 70s have 100-amp panels, which can’t safely handle modern electrical loads.
Today’s homes need 200-amp service to support HVAC systems, kitchen appliances, EV chargers, and home offices. If you’re adding any major electrical equipment or renovating, your existing panel probably won’t cut it. We assess your current setup, calculate your load requirements, and recommend a panel size that fits your actual usage—not just what meets minimum code.
An outdated panel isn’t just inconvenient. It’s a fire hazard. Overloaded circuits generate heat, and old breakers don’t always trip when they should. Upgrading your panel protects your home and gives you the capacity to use electricity the way modern life requires.
A licensed electrical contractor in Oak Point, TX carries state certification, insurance, and the training to handle complex electrical work safely. Handymen can swap out light fixtures, but they’re not qualified to upgrade panels, rewire circuits, or install generators.
Electrical work in Texas requires permits and inspections. Licensed contractors know current NEC codes and local requirements, which means your project passes inspection the first time. If someone without a license does the work and something goes wrong—fire, injury, failed inspection—your homeowner’s insurance may not cover it.
We’ve seen plenty of DIY and unlicensed work that created bigger problems than it solved. Wiring done wrong doesn’t just fail—it’s dangerous. When you hire a licensed contractor, you’re paying for expertise, accountability, and the assurance that the work meets legal and safety standards.
We offer same-day emergency service for urgent electrical problems. If you’ve got sparking outlets, burning smells, or total power loss, that’s a safety issue that needs immediate attention.
Texas heat makes power outages more than inconvenient—they’re dangerous, especially for families with young kids or anyone with medical equipment. We prioritize emergency calls and get someone to your home as fast as possible. Our electricians carry the tools and parts needed to handle most emergency repairs on the spot.
Not every electrical issue is an emergency, and we won’t charge you emergency rates if it can wait. But if your situation is urgent, we respond quickly because we understand what’s at risk. Electrical fires and shock hazards don’t give you time to wait for a convenient appointment.
Power strips protect individual devices, but they don’t stop surges at the source. Whole-house surge protection installs at your electrical panel and guards every circuit in your home—including hardwired appliances like HVAC systems, refrigerators, and garage door openers.
North Texas gets hit with lightning strikes and grid fluctuations regularly. A single surge can fry your HVAC control board, damage your refrigerator’s compressor, or destroy electronics throughout your house. Power strips can’t handle surges that come through your main electrical line.
Whole-house surge protectors cost a few hundred dollars to install and can save you thousands in damaged equipment. If you’ve got expensive appliances, a home office, or medical devices, it’s one of the smartest electrical upgrades you can make. We install UL-listed surge protection systems that actually work when you need them.
Generator size depends on what you want to power during an outage. A 10-12 kW generator handles essentials like refrigerators, lights, and a few outlets. A 20-22 kW unit can run your whole house, including HVAC, which matters during Texas summers and winter freezes.
We calculate your home’s electrical load to recommend the right size. Running your air conditioning during a power outage requires significantly more capacity than just keeping the lights on. If you’ve got a larger home or want to maintain normal routines during extended outages, you’ll need a bigger generator.
Installation cost varies based on generator size, fuel type (natural gas or propane), and how far the unit sits from your electrical panel and gas line. We handle the entire process—permits, installation, connection, and testing. A properly sized and installed generator kicks in automatically when the grid fails, so you’re not dealing with extension cords or manual switches in the dark.
Simple repairs like replacing outlets or switches usually run $150 to $300. Circuit troubleshooting and rewiring cost more—typically $300 to $800 depending on what’s involved. Panel upgrades range from $1,800 to $3,200 based on your home’s size and electrical needs.
We give you a clear price before starting any work. No hidden fees, no surprise charges after the job’s done. If we find additional problems while we’re working, we explain what’s wrong and what it costs to fix before moving forward.
Electrical work isn’t something you want to cheap out on. Low prices usually mean unlicensed contractors, substandard materials, or shortcuts that create safety hazards. We use commercial-grade components and UL-listed parts because they last longer and perform better. You’re paying for work that’s done right, passes inspection, and keeps your family safe—not just the cheapest option available.
