Hear from Our Customers
Your breakers stop tripping every time you run the AC and microwave together. Your panel actually has the capacity your home needs instead of limping along with a 100-amp system built for the 1980s. You’re not wondering if that burning smell near the outlet is going to turn into something worse.
Most homes in Denton built before 2000 are running on electrical systems that weren’t designed for modern loads. You’ve added central air, upgraded appliances, maybe a home office setup. The wiring hasn’t changed. That’s why lights flicker during storms and breakers trip when you’re just trying to make dinner.
When you work with us as your licensed electrical contractor in Denton, TX, you’re getting code-compliant work that actually solves the problem instead of patching it. That means permits pulled, inspections passed, and electrical systems that handle what you’re actually using them for. You’re not calling us back in six months because the same circuit is acting up again.
We’ve been handling electrical work in Denton, TX since 1999. We’re a family-owned electric repair company based in Fort Worth, fully licensed and insured, with an A+ BBB rating and multiple Super Service Awards. That’s not marketing talk—it’s what happens when you show up on time and do the work right.
Denton homeowners deal with specific challenges. Storm damage that leaves panels compromised. Older homes with aluminum wiring that needs updating. Power outages that last longer than they used to. We’ve seen what happens when electrical systems fail here, and we know what it takes to fix them properly.
You’re not getting a sales pitch when you call. You’re getting a licensed electrician who’ll walk you through what’s wrong, what it costs to fix, and what happens if you don’t. Then you decide.
You call or submit a request. We schedule a time that works for you—usually same-day or next-day unless you’re dealing with an emergency, in which case we’re typically there within 1-2 hours. Our service vehicles are fully stocked, so most repairs get handled during the first visit.
When we arrive, we diagnose the issue and explain what’s happening in plain terms. You’ll get upfront pricing before any work starts. No surprises when the job’s done. If you need a panel upgrade, we’ll pull the permits, handle the inspections, and make sure everything meets current code requirements.
For bigger jobs like whole-home rewiring or generator installations, we’ll walk the property, assess what’s needed, and give you a detailed estimate. Generator installs include site evaluation, gas line connections, electrical integration, and automatic transfer switches. The system turns on within seconds of losing power, and you don’t have to do anything.
Most electrical repairs—outlet replacements, breaker fixes, circuit additions—are completed the same day. Panel upgrades typically take a day or two depending on the scope. You’ll know the timeline before we start, and we’ll keep you updated if anything changes.
Ready to get started?
You’re getting licensed electricians who carry current Texas licensing and comprehensive insurance. Every job includes code-compliant work, permits where required, and commercial-grade materials that last decades longer than standard residential components. We use UL-listed parts because they’re tested and proven—not because they’re cheaper.
Denton residents paid about 18 cents per kWh in 2024, which is 4% higher than the national average. That makes energy efficiency matter. When we upgrade panels or install new circuits, we’re looking at ways to reduce your monthly costs—LED lighting upgrades, whole-house surge protection, smart home electrical components that actually lower consumption instead of just adding convenience.
If you’re dealing with an older home, we’ll update outdated aluminum wiring to copper, install GFCI outlets in kitchens and bathrooms, and add dedicated circuits for high-draw appliances. For newer builds or renovations, we handle EV charging station installations, recessed lighting design, and outdoor lighting systems.
Generator installations have become standard in Denton, not optional. Power outages are lasting longer and happening more often. The household generator market hit $4.3 billion in 2026 because people realized backup power isn’t a luxury anymore—it’s a necessity. We’ll size the system correctly, integrate it with your electrical panel, and make sure it’s ready before the next storm hits.
Your breakers trip frequently even when you’re not running anything unusual. Lights dim when the AC kicks on. You smell burning near the panel or see discoloration on the cover. Those are signs your panel is overloaded or failing.
Most homes in Denton built before 2000 have 100-amp panels. Modern homes need 200 amps minimum to handle HVAC systems, kitchen appliances, electronics, and everything else you’re running daily. If you’re adding an EV charger or a backup generator, your current panel probably can’t support it.
Panel upgrades aren’t just about capacity—they’re about safety. Older panels with Federal Pacific or Zinsco breakers have known failure rates. They don’t trip when they should, which means wires overheat and fire risk increases. We’ll assess your current system, calculate your actual load requirements, and recommend the right size panel. Most upgrades take one to two days and include permits and inspections to ensure everything meets current code.
Turn off the breaker to that circuit immediately. Don’t use the outlet or switch until an electrician inspects it. Burning smells indicate overheating wires, loose connections, or damaged insulation—all of which can lead to electrical fires.
This happens more often in older homes where outlets are handling loads they weren’t designed for. You plug in a space heater or hair dryer, and the wiring can’t handle the draw. The connection heats up, insulation starts melting, and that’s when you smell it.
We’ll inspect the outlet, check the wiring behind it, and determine if it’s a simple fix or if you need circuit upgrades. Sometimes it’s just a loose connection. Other times it’s aluminum wiring that needs replacing or an overloaded circuit that needs to be split. Either way, don’t ignore it. What starts as a burning smell can turn into an actual fire if the wiring fails completely.
Most standby generator installations take two to three days from start to finish. That includes site evaluation, gas line connections, electrical integration, and startup certification. The timeline depends on your property layout and whether we need to run new gas lines or upgrade your electrical panel to support the generator.
We’ll assess your home’s power needs first—what you want running during an outage. Full-house coverage requires a larger generator than just keeping the fridge, HVAC, and a few outlets going. Once we size the system correctly, we handle permits, coordinate inspections, and install the automatic transfer switch that detects outages and starts the generator within seconds.
Denton saw an average of 243 minutes of power outages in 2023, up 35% since 2015. Storms are getting worse, and outages are lasting longer. A properly installed generator means you’re not losing food, dealing with frozen pipes, or sitting in the dark waiting for power to come back. The system runs on natural gas or propane, starts automatically, and shuts off when grid power returns. You don’t have to do anything.
Yes, most electrical work in Denton requires permits. Panel upgrades, new circuits, generator installations, and any work that involves opening walls or adding capacity needs a permit. Simple repairs like replacing an outlet or fixing a switch usually don’t, but anything that changes your system does.
Permits aren’t red tape—they’re safety checks. An inspector verifies the work meets current electrical code, which protects you from faulty installations that can cause fires or system failures. If you ever sell your home, unpermitted electrical work can kill a deal or force you to redo everything at your expense.
We handle permits as part of the job. We pull them, schedule inspections, and make sure everything passes. You’re not dealing with the city or trying to figure out what’s required. The work gets done right, the inspector signs off, and you have documentation that the electrical system is code-compliant. That matters for insurance, resale value, and your own safety.
A service call is scheduled—you’re dealing with an issue that needs fixing, but it’s not immediately dangerous. Breakers tripping occasionally, outlets not working, lights flickering. We’ll get there same-day or next-day depending on availability.
An emergency call is when something’s actively wrong and potentially dangerous. Sparking outlets, burning smells, complete power loss, exposed wiring. We respond within 1-2 hours because these situations can escalate fast. Our trucks are stocked for most emergency repairs, so we’re usually able to fix the problem during that first visit.
Emergency calls cost more because we’re dropping everything to get there quickly, often outside normal business hours. But if you’re dealing with a legitimate electrical hazard—something that could cause a fire or injure someone—it’s worth it. A regular service call is fine for non-urgent issues. If you’re not sure which you need, call and describe what’s happening. We’ll tell you if it’s something that can wait or if we need to get there immediately.
Whole-house rewiring typically runs between $8,000 and $15,000 for an average-sized home in Denton, depending on square footage, accessibility, and whether walls need to be opened. Older homes with aluminum wiring or knob-and-tube systems cost more because the existing wiring has to be completely removed and replaced with modern copper.
The price includes new wiring throughout the house, updated outlets and switches, a new electrical panel if needed, permits, and inspections. If your home was built before 1970, there’s a good chance the wiring doesn’t meet current code and can’t safely handle modern electrical loads. That’s when rewiring stops being optional.
You’ll get upfront pricing before any work starts. We’ll assess your home, identify what needs replacing, and give you a detailed estimate that breaks down labor, materials, and timeline. Most rewiring projects take three to five days depending on the size of the home and how much drywall work is involved. It’s not a small job, but it’s the difference between an electrical system that’s barely functional and one that’s safe, reliable, and built to last another 40 years.
