Hear from Our Customers
Your breakers stop tripping every time you run the AC and microwave together. Your lights don’t flicker when a storm rolls through. Your home passes inspection without surprises, and your insurance stays valid because everything’s up to code.
You’re not calling another electrician in six months to redo bad work. You’re not wondering if that burning smell means something’s about to catch fire. You’ve got a system that handles Texas summers, protects your family from electrical hazards, and keeps running when you need it most.
That’s what happens when a licensed electrical contractor in Dallas, TX does the job with commercial-grade materials and 25 years of local experience. No shortcuts. No guessing. Just electrical work that actually lasts.
We’re a family-owned electrical company that’s been serving Dallas, TX and the Mid-Cities for over 25 years. We’re not a franchise or a national chain—we’re local electricians who know exactly what permits Dallas requires, what code violations inspectors flag in older neighborhoods, and what happens to home electrical systems when Texas weather swings 60 degrees in two days.
Every electrician on our team carries current Texas licensing and insurance. We’ve earned an A+ rating with the Better Business Bureau and multiple Super Service Awards because we show up when we say we will, we explain what’s wrong in plain language, and we don’t leave until your electrical system works the way it should.
You call or message us with your electrical problem. We ask a few questions to understand what’s happening—breakers tripping, outlets not working, panel buzzing, whatever it is. If it’s an emergency, we get someone out the same day.
When we arrive, we diagnose the issue and explain what’s wrong before we touch anything. You’ll know what needs fixing, why it matters, and what it costs before any work starts. No surprises, no upselling services you don’t need.
Once you approve the work, we fix it using commercial-grade materials and proper code-compliant methods. We pull permits when required, we clean up after ourselves, and we test everything to make sure it works. You get a clear invoice and a system that’s safer than when we found it.
Ready to get started?
You get a full safety inspection of the affected circuits and panel, not just a quick patch job. We check for code violations, outdated wiring, overloaded circuits, and fire hazards that most homeowners don’t know exist. If your home was built before 2000, there’s a good chance your electrical system doesn’t meet current Dallas code requirements—and that matters when you file an insurance claim or sell your house.
Our electrical services in Dallas, TX cover everything from simple outlet repairs to complete panel upgrades, whole-house surge protection, backup generator installation, and EV charging station setup. We handle both residential and commercial projects, and every job gets the same attention whether it’s a $200 repair or an $18,000 generator system.
Dallas recorded 210 power outages between 2000 and 2023—more than any other Texas city. The 2021 freeze left thousands without power for days, and summer storms knock out electricity when you need AC most. That’s why more Dallas homeowners are installing backup generators and whole-home surge protection. We’ll walk you through what makes sense for your home and your budget.
Most Dallas homeowners pay between $200 and $400 for a complete electrical safety inspection. That covers checking your main panel, testing circuits, inspecting outlets and switches, verifying grounding, and identifying code violations or fire hazards.
If you’re buying a home, refinancing, or adding a major appliance like a hot tub or EV charger, an inspection catches problems before they become expensive emergencies. Insurance companies sometimes require proof of inspection for older homes, and it’s a smart move if your house was built before 1990.
We include a basic safety check with most repair calls at no extra charge. If we’re already at your house fixing a tripped breaker, we’ll look at the rest of your panel and let you know if anything else needs attention.
Yes, most electrical work in Dallas requires a permit—especially anything involving your main panel, new circuits, or major appliances. Replacing outlets or light fixtures usually doesn’t need one, but adding a circuit, upgrading your panel, or installing a generator does.
Dallas inspectors check for proper wire sizing, correct breaker ratings, grounding, and code compliance. If you skip the permit and something goes wrong, your insurance might not cover the damage. When you sell your house, unpermitted work can kill a deal or force you to pay for expensive corrections.
We handle all permits and inspections as part of the job. You don’t have to deal with the city or worry about whether the work will pass. We know what Dallas inspectors look for because we’ve been doing this for 25 years.
A standby generator installation typically takes two to three days from start to finish. Day one involves site prep, pouring the concrete pad, and running the gas line. Day two covers the electrical connections, transfer switch installation, and hooking everything up to your main panel. Day three is testing, final inspection, and walking you through how to use it.
Whole-home generators cost between $6,500 and $18,000 depending on size and fuel type. Natural gas is cheaper to run but requires a gas line connection. Propane works anywhere but needs tank refills. We’ll help you figure out what size you need based on what you want to keep running during an outage—just the essentials or your whole house.
After the 2021 freeze and repeated summer outages, generator demand in Dallas has doubled. If you’re considering one, don’t wait until the next storm to call. Lead times for equipment can stretch weeks during peak season.
Overloaded circuits are the most common reason. You’re running too many high-draw appliances on the same circuit—AC, microwave, hair dryer, space heater—and the breaker does its job by shutting off before the wire overheats. ONCOR reported higher than average circuit issues in Dallas during 2023 because homes are pulling more power than ever.
Older homes weren’t wired for modern electrical loads. If your house was built before 1990, your panel might only have 100 amps of service. Today’s homes need 200 amps minimum to handle AC, appliances, computers, and charging devices. Short circuits and ground faults also trip breakers, and those usually mean damaged wiring or a failing appliance.
If the same breaker keeps tripping, don’t just reset it and hope for the best. That’s a fire hazard. We’ll test the circuit, check the load, and either redistribute your electrical demand or upgrade your panel if needed.
Probably, yes—especially if your home has a 100-amp panel or your current panel is already running close to capacity. A Level 2 EV charger pulls 40 to 50 amps, which is a significant load. If your panel can’t handle it, you’ll trip breakers constantly or risk overheating your system.
We’ll calculate your total electrical load before recommending an upgrade. If you’re running AC, a pool pump, electric appliances, and now an EV charger, a 200-amp panel makes sense. Panel upgrades in Dallas typically cost between $1,800 and $3,500 depending on your home’s wiring and whether we need to upgrade your meter base.
EV charging infrastructure is growing fast in Dallas, and more homeowners are installing chargers before they even buy the vehicle. If you’re planning to go electric in the next few years, upgrading your panel now saves you from doing it twice.
If your home was built before 2000, there’s a good chance parts of your electrical system don’t meet current Dallas code. Older homes often have outdated wiring like aluminum wire, ungrounded outlets, insufficient circuits, or panels that don’t meet today’s safety standards. Code requirements change over time, and what was legal when your house was built might not pass inspection now.
Common violations we find include missing GFCI outlets in kitchens and bathrooms, overloaded circuits, improper wire splices, and panels with mismatched breakers. These aren’t just paperwork problems—they’re fire hazards. About 400 people are electrocuted at home every year, and outdated wiring is a major contributor.
We’ll inspect your system and give you a clear list of what needs updating. Some fixes are simple and inexpensive. Others, like rewiring or panel replacement, cost more but protect your family and keep your insurance valid. You’ll know exactly where you stand and what your options are.
