Hear from Our Customers
Your lights work when you flip the switch. Your outlets don’t spark when you plug something in. Your panel doesn’t hum or smell like burning plastic.
That’s the baseline. But here’s what else you get: a licensed electrical contractor who shows up when we say we will, tells you the real cost before starting work, and doesn’t leave until everything’s tested and safe. You’re not wondering if the job was done right or if you’ll have the same problem next month.
Most electrical companies in Corinth, TX will fix the immediate issue. We fix it and show you why it happened so you can make informed decisions about your system. If your panel’s overloaded because your home wasn’t wired for modern power demands, you’ll know. If that flickering light is actually a loose connection that could start a fire, you’ll know that too.
Carroll Service Co has been serving Corinth, TX and the Mid-Cities for over 25 years. We’re family-owned, fully licensed, and we carry the insurance that protects your property if something goes wrong.
Our A+ rating with the Better Business Bureau and multiple Super Service Awards from Angie’s List didn’t happen by accident. They happened because we show up on time, we charge what we quote, and we don’t leave until the job’s done right. We’ve seen what happens when electrical work gets rushed or done by someone who doesn’t know Corinth’s mix of older homes and new construction. Outdated wiring meets modern power loads, and that’s when you get tripped breakers, overheated panels, and real safety risks.
We know the local code requirements, the permit process, and how to handle everything from a simple outlet replacement to a full panel upgrade that brings your home up to 2020 NEC standards.
You call or message us with the problem. We ask a few questions to understand what’s happening and whether it’s an emergency. If it is, we’re often on-site within twenty minutes.
When we arrive, we diagnose the issue completely before touching anything. You get a clear explanation of what’s wrong, what it’ll take to fix it, and what it costs. No surprises, no upselling, no pressure. If you approve, we start work. If you need time to think, that’s fine too.
Once the work’s done, we test everything to make sure it’s safe and code-compliant. We walk you through what we did and answer any questions. If permits were required, we handle that process. You’re left with a system that works reliably and documentation that proves the work was done right.
Ready to get started?
Every job starts with a complete diagnostic. We don’t just fix the symptom—we find the root cause. That flickering light might be a bad bulb, or it might be a loose connection that’s arcing inside your wall. You need to know which one it is.
Corinth homes face specific challenges. The area averages over 50 thunderstorm days per year, which means power surges are a constant threat to your electronics and appliances. If your home was built before 2020, it probably doesn’t have the surge protection that’s now required by code. We’ll tell you if that’s putting your system at risk.
Our wiring services cover everything from adding new circuits for EV chargers to rewiring older homes that are still running on outdated systems. We use commercial-grade materials that last decades, not the cheapest components that’ll need replacing in five years. And because we’re a licensed electrical contractor with full insurance coverage, you’re protected if anything goes wrong during the job.
We offer 24/7 emergency response for electrical issues that pose immediate safety risks. If your panel is sparking, you smell burning plastic, or you’ve lost power completely, we treat that as an emergency and typically arrive within twenty minutes in the Corinth area.
For urgent but non-emergency issues like a tripped breaker that won’t reset or outlets that aren’t working, we offer same-day service in most cases. We understand that electrical problems don’t wait for convenient business hours, and neither do we.
When you call, we’ll ask specific questions to determine the severity of the issue and give you an honest timeframe. If it can wait until morning, we’ll tell you. If it needs immediate attention, we’re already on our way.
We’ve been doing this for 25 years in the DFW and Mid-Cities area, so we’ve seen every type of electrical system and every kind of problem. That experience matters when you’re diagnosing issues in older Corinth homes that weren’t built for modern power demands.
We’re fully licensed and insured, which should be standard but isn’t always the case. Our A+ BBB rating and multiple Super Service Awards reflect consistent customer satisfaction, not just good marketing. We show up when we say we will, we charge what we quote, and we don’t leave until everything’s tested and working safely.
The biggest difference is probably transparency. We explain what’s wrong, why it happened, and what your options are. If you need a full panel upgrade, we’ll tell you. If you just need a new breaker, we’ll tell you that too. You make the decision based on complete information, not a sales pitch.
Yes, and here’s why: electrical work that looks simple on the surface can hide serious safety issues. A loose wire that’s not properly connected might work fine for months, then start a fire inside your wall. You won’t know until it’s too late.
Licensed electrical contractors in Corinth, TX are required to follow specific code requirements and safety standards. We carry insurance that protects your property if something goes wrong. An unlicensed handyman doesn’t have that coverage, which means you’re liable if their work causes damage or injury.
Texas has strict licensing requirements for electrical work because the stakes are high. Electrocution and electrical fires are real risks when work isn’t done correctly. A licensed contractor has the training to spot problems you can’t see and the experience to fix them safely. That’s not something you want to gamble on to save a few dollars.
It depends entirely on what needs fixing. A simple outlet replacement might run $150-$200. A breaker panel upgrade for an older home could be $2,000-$4,000 depending on the size and complexity. Whole-house surge protection installation typically falls in the $500-$1,500 range.
We provide upfront pricing before we start any work. You’ll know exactly what it costs, what’s included, and how long it’ll take. No hidden fees, no surprise charges when we’re done. If we find additional issues during the diagnostic, we’ll explain what they are and give you a separate quote before proceeding.
The real cost isn’t just the repair itself—it’s what happens if the repair isn’t done right. Cheap electrical work can lead to repeated service calls, damaged appliances from power surges, or worse. We use quality materials and proven methods that fix the problem permanently, which saves you money in the long run.
First, unplug everything on that circuit and try resetting the breaker once. If it stays on, plug your devices back in one at a time to identify which one is causing the problem. If the breaker trips immediately even with nothing plugged in, don’t keep resetting it—that’s a sign of a more serious issue.
Breakers trip for a reason. They’re protecting your home from overloaded circuits, short circuits, or ground faults. In older Corinth homes, the most common cause is simply too much demand on circuits that weren’t designed for modern power loads. Your home might be running on 100-amp service when it really needs 200 amps.
Call us to diagnose the issue properly. We’ll test the circuit, check for damaged wiring, and determine whether you need a new breaker, additional circuits, or a panel upgrade. Repeatedly resetting a tripping breaker without fixing the underlying problem can overheat wiring and create a fire hazard.
If your home was built after 2020, it’s required by code. If it was built before that, you should strongly consider adding one. Corinth is in one of the most active lightning corridors in Texas, with over 50 thunderstorm days per year. Each storm brings the risk of power surges that can damage everything from your HVAC system to your kitchen appliances.
A whole-house surge protector installs at your main panel and protects every circuit in your home. It’s different from those power strips you plug into outlets—those only protect the devices plugged into them, and they don’t stop surges coming through your electrical panel.
The cost of installation is typically $500-$1,500 depending on your panel setup. Compare that to replacing a fried HVAC control board ($800-$1,200), a damaged refrigerator ($1,500-$3,000), or multiple electronics after a single surge event. It’s one of the most cost-effective upgrades you can make, especially in an area with as much storm activity as Corinth.
