Commercial Lighting Installation in DFW and Mid-Cities

Lighting That Works as Hard as Your Business Does

Professional commercial lighting installation for businesses across DFW and Mid-Cities—Tarrant County, Dallas County, and Denton County—done right, on schedule, with no surprise charges and no shortcuts.

DFW Commercial Lighting Contractors

Your Space Deserves More Than Flickering Fluorescents

Bad lighting is one of those problems that’s easy to ignore until it isn’t. Customers notice it. Employees feel it. And every month you’re running outdated fixtures, you’re paying more on your energy bill than you should be. Commercial lighting accounts for roughly 15% of a business’s electricity use — and that number climbs fast in a Texas summer when inefficient fixtures are adding heat load on top of what your HVAC is already fighting. We install commercial lighting systems for businesses across DFW and Mid-Cities—Fort Worth, Arlington, Irving, Lewisville, Keller, Southlake, Hurst, North Richland Hills, and throughout Tarrant, Dallas, and Denton County. Whether you’re upgrading an existing system, finishing out a new tenant space, or building from the ground up, we handle the full scope: design, load calculations, permitting, installation, and final inspection. No handoffs, no subcontractors, no guesswork.

Hear from Our Customers

LED Commercial Lighting Benefits DFW

What Changes After a Proper Lighting Upgrade

The right commercial lighting system doesn’t just look better — it lowers your bills, improves your space, and protects your business long-term.

Ready to get started?

Commercial Lighting Installation Process Texas

There's More to This Than Swapping Bulbs

Commercial lighting installation is a different animal than residential work. The fixture types are different, the load calculations are more involved, the code requirements are stricter, and the stakes are higher — because your business is running in that space every day. Under Texas law, all non-exempt commercial electrical work must be performed through a licensed Electrical Contractor holding a current TDLR license with a licensed Master Electrician on staff. That’s not a technicality — it’s the law under Texas Occupations Code, Chapter 1305. Hiring someone who doesn’t meet that standard puts you at risk for code violations, failed inspections, and insurance complications that can be expensive to fix after the fact. We handle every part of the process correctly. That means a proper site assessment before anything is ordered, load calculations to make sure your existing circuits can support the new system, and full permit coordination with your local municipality — whether that’s Fort Worth, Keller, Southlake, or anywhere else across Tarrant, Dallas, or Denton County. We’ve been doing this in the DFW and Mid-Cities market for 25 years, so we know exactly what each jurisdiction requires and how to keep your project moving without delays.

Commercial LED Retrofit and Upgrade DFW

Tax Deductions and Rebates Most Businesses Miss

Here’s something most commercial lighting contractors don’t bring up: the federal Section 179D deduction allows qualifying businesses to deduct $0.57 to $1.13 per square foot for energy-efficient commercial lighting upgrades. For a 5,000-square-foot space, that’s a potential deduction of $2,850 to $5,650 — before you’ve saved a dollar on your energy bill. On top of that, Oncor Electric Delivery — the primary electricity distributor across most of the DFW and Mid-Cities service area—offers rebate programs for qualifying LED lighting upgrades. Between the federal deduction and the Oncor rebate, the real out-of-pocket cost of a commercial lighting upgrade is often significantly lower than the initial quote suggests. We’re not accountants, and we’ll always tell you to confirm the specifics with your tax advisor. But we do know what qualifies, and we install systems the right way so you’re positioned to take advantage of every incentive available. If you’re a business owner in Fort Worth, Lewisville, Irving, or anywhere across Tarrant, Dallas, or Denton County, it’s worth understanding what’s on the table before you decide to wait.

Commercial Lighting Installation FAQs

Common questions about our Commercial Lighting Installation services

Does commercial lighting installation in Texas require a licensed electrical contractor?

Yes — and this is one of the most important things to verify before hiring anyone. Under the Texas Electrical Safety and Licensing Act (Texas Occupations Code, Chapter 1305), all non-exempt commercial electrical work must be performed by or through a licensed Electrical Contractor holding a current TDLR license. That contractor must also employ a licensed Master Electrician who supervises the work. Hiring someone who doesn’t meet these requirements isn’t just risky — it’s illegal, and it can result in failed inspections, code violations, voided insurance coverage, and costly rework. Every job we do is performed under full TDLR licensing with comprehensive general liability insurance in place.

Do I need permits for commercial lighting installation in Fort Worth, Lewisville, or other DFW and Mid-Cities areas?

In most cases, yes. Commercial lighting installation across Tarrant, Dallas, and Denton County typically requires electrical permits and inspections from the local municipality. The specific requirements vary significantly by city — what Fort Worth requires isn’t identical to what Keller, Southlake, Lewisville, or Arlington requires — and that’s where 25 years of working in this market actually matters. We handle all permit coordination on your behalf, so you’re not navigating city building departments on your own. Unpermitted commercial electrical work can create serious complications during property sales, insurance claims, or future renovations, so doing it right from the start protects you down the road.

How much does commercial lighting installation cost for a small business?

There’s no single number that applies to every project — it depends on the size of your space, the type of fixtures you’re upgrading to, the condition of your existing electrical infrastructure, and the scope of the installation. That said, small businesses typically invest somewhere between $10,000 and $20,000 to modernize a full commercial lighting system. The more useful number to focus on is payback period: most commercial LED upgrades recover their cost within two to four years through energy savings alone. Factor in the federal Section 179D deduction and any available Oncor rebates, and the real net cost is often meaningfully lower than the upfront quote. We provide clear, written estimates before any work begins — no guessing, no surprises.

How long does commercial lighting installation take, and will it shut down my business?

Most commercial lighting projects don’t require a full business closure, and we actively work to keep it that way. Depending on the size and complexity of your space, installations can range from a single day to a few days for larger facilities. We coordinate with you ahead of time to understand your operating hours and schedule work accordingly — whether that means working evenings, weekends, or phasing the project in sections so your business stays open throughout. The goal is to get the job done correctly without making your life harder in the process. We’ve done this for businesses across Fort Worth, North Richland Hills, Hurst, and throughout the Mid-Cities corridor, and the approach is always the same: finish efficiently, clean up completely, and leave the space better than we found it.

What types of commercial lighting do you install?

We install a wide range of commercial lighting systems depending on the application. For interior spaces, that includes recessed lighting, high bay and low bay fixtures for warehouses and large open spaces, office and retail lighting, and LED panel and troffer systems that replace traditional fluorescent fixtures. For exterior applications, we handle wall pack lighting, parking lot and parking garage lighting, security and flood lighting, and landscape lighting for commercial properties. We also install occupancy sensors, dimming controls, and smart lighting systems for businesses looking to automate their energy management. If you’re not sure what your space needs, the site assessment will tell us both — that’s exactly what it’s for.

Is LED really worth it for commercial spaces in DFW and Mid-Cities, or is it just a trend?

LED is not a trend — it’s the direction the entire industry has moved, and for good reason. The U.S. Department of Energy projects that LED lamps will account for 84% of all lighting installations by 2035. For commercial spaces specifically, the financial case is straightforward: LED systems use up to 75% less energy than incandescent predecessors, and they last significantly longer than fluorescent alternatives, which reduces maintenance and replacement costs over time. In the DFW and Mid-Cities market across Tarrant, Dallas, and Denton County, there’s an added benefit that doesn’t apply everywhere — Texas summers are brutal, and traditional commercial fixtures generate substantial heat. LED systems run cooler, which means your HVAC isn’t working as hard to compensate during those 100-degree days in July and August. The energy savings, lower maintenance costs, and improved light quality all compound over time. It’s not hype — the numbers support it.

Commercial Lighting Installation in DFW and Mid-Cities

DFW Commercial Lighting Contractors

LED Commercial Lighting Benefits DFW

Your monthly energy costs drop — LED systems use up to 75% less electricity than the older fixtures they replace.

Your HVAC works less in summer because LED fixtures generate significantly less heat than fluorescent or HID systems.

Your employees are more productive — research shows well-designed lighting improves workplace output by as much as 6%.

Your business looks more professional, with consistent, even light that doesn't flicker, dim, or cast harsh shadows.

You avoid the code violations and liability that come with unlicensed electrical work on a commercial property.

You get a clear payback window — most commercial LED upgrades recover their cost within two to four years through energy savings alone.