Hear from Our Customers
You stop worrying about whether that breaker will trip again in the middle of dinner. Your outlets work when you need them. Your panel isn’t overheating in the garage.
The lights stay on during storms because your backup generator actually kicks in. Your EV charges overnight without overloading circuits that weren’t built for it. You’re not calling someone back to fix what should’ve been done correctly the first time.
When electrical work gets handled by someone who knows McLennan County codes and actually pulls the permits, you’re not dealing with failed inspections or insurance headaches later. You’re just living in a home where the electrical system does its job without making you think about it every day.
We’ve been handling residential electrical services in McLennan County, TX and throughout the Dallas-Fort Worth area since before most of your neighbors moved here. We’re family-owned, fully licensed, and we’ve earned an A+ Better Business Bureau rating by doing what we say we’ll do.
We know McLennan County’s building codes, permit requirements, and what inspectors look for. We know which neighborhoods have older wiring that can’t handle modern loads. We know the local utility quirks that cause problems other electricians miss.
You’re not getting a franchise crew that’s here today and gone tomorrow. You’re getting electricians who’ve been in these homes before and know exactly what needs fixing.
You call or message us with the problem. We ask a few questions to understand what’s going on and whether it’s an emergency. If you need someone today, we’ll tell you when we can be there.
When we show up, we assess the situation and explain what’s wrong in plain terms. No jargon. No upselling. Before we touch anything, you get a clear price for the work. If you approve it, we get started. If not, you’re not charged for the visit.
We complete the work using commercial-grade materials that last. We test everything to make sure it’s functioning correctly and safely. Then we walk you through what we did and answer any questions. If permits were required, we handle that too. You get documentation of the work, and if anything isn’t right, we come back and make it right.
Ready to get started?
We handle electrical troubleshooting for homes in McLennan County, TX when you’re dealing with breakers that keep tripping, outlets that don’t work, or lights that flicker. We track down the actual cause instead of just resetting the breaker and hoping it holds.
For homes that need upgrades, we install new electrical panels that can handle modern loads. McLennan County residents pay an average of $166 monthly for electricity, and outdated panels waste energy while creating safety risks. We also install whole-house surge protection to keep your electronics safe during the power outages that hit this area about once a year.
If you’re adding an electric vehicle or installing smart home systems, we handle the wiring and charging station installation. Homes built 20+ years ago weren’t designed for these loads, and trying to run them on old circuits causes problems. We also install backup generators so you’re not sitting in the dark for two hours every time a storm rolls through.
Your panel needs an upgrade if breakers trip frequently, you smell burning near the panel, or you see rust and corrosion on the box. These are safety issues, not inconveniences.
Most homes in McLennan County built before 2000 have 100-amp or 150-amp panels. If you’re running modern appliances, HVAC systems, EV chargers, or multiple electronics, you likely need 200 amps minimum. When your system is maxed out, circuits overheat and breakers fail.
Another sign is if you’re using extension cords regularly because you don’t have enough outlets. That means your home’s electrical capacity isn’t matching how you actually live. We assess your current usage and future needs before recommending an upgrade, and we pull all required permits so the work passes inspection the first time.
Power strips protect individual devices plugged into them. A whole-house surge protector defends your entire electrical system at the panel level, stopping surges before they reach any outlet in your home.
McLennan County sees power outages and surges from storms, grid fluctuations, and utility work. When a surge hits, it can fry appliances, HVAC systems, and anything plugged in throughout your house. Power strips won’t stop that.
Whole-house protection installs directly at your electrical panel and handles surges up to 40,000 amps or more. It’s a one-time installation that protects everything, including hardwired systems like your HVAC, water heater, and garage door opener. For homes with expensive electronics and smart systems, it pays for itself the first time it stops a major surge.
It depends on your current panel capacity and how much load you’re already running. Most Level 2 EV chargers need a dedicated 240-volt circuit with 40-50 amps, which is a significant draw.
If your home has a 200-amp panel with available capacity, we can often add the circuit without a full upgrade. But if you’re already running close to capacity with HVAC, appliances, and other systems, adding an EV charger will overload your panel and trip breakers constantly.
We measure your current electrical load before recommending anything. Sometimes a panel upgrade is necessary. Sometimes we can balance loads differently or upgrade just the panel capacity. Either way, you need a licensed electrician to install the charger correctly and pull permits. DIY EV charger installations fail inspections and create fire hazards because the wiring and breaker sizing have to be exact.
Flickering lights mean something’s wrong with your electrical system. Sometimes it’s minor, like a loose bulb or bad switch. Other times it’s a serious issue like loose wiring, an overloaded circuit, or a failing panel connection.
If lights flicker when you turn on large appliances like the AC or dryer, your circuits are likely overloaded or your panel can’t handle the demand. If flickering happens randomly or in multiple rooms, you could have loose connections that create heat and fire risk.
We troubleshoot the actual cause by testing connections, measuring voltage, and checking your panel for issues. Ignoring flickering lights is how small electrical problems turn into house fires. McLennan County building codes require licensed electricians to handle this work because improper repairs make the problem worse and void your homeowner’s insurance if something happens.
Simple repairs like replacing an outlet or fixing a tripped breaker take 30 minutes to an hour. More involved work like troubleshooting a circuit issue or installing new wiring takes 2-4 hours depending on access and complexity.
Panel upgrades typically take 4-8 hours because we’re replacing the main service panel, reconnecting all circuits, and coordinating a temporary power shutdown with the utility. Backup generator installations take 1-2 days including the electrical connection, gas line work, and testing.
We give you a time estimate upfront based on the specific work your home needs. McLennan County permit requirements can add a day or two to the timeline for inspections, but we handle all of that coordination. Emergency repairs get prioritized and we’ll get someone out the same day when you’re dealing with power outages or safety hazards.
Yes. McLennan County requires permits for most electrical work beyond simple repairs like replacing a light fixture or outlet. Panel upgrades, new circuits, generators, and EV chargers all need permits and inspections.
Permits exist because electrical work done wrong kills people and burns down houses. Inspectors verify the work meets code and is safe. If you skip permits and something goes wrong, your homeowner’s insurance can deny your claim. When you sell your home, unpermitted electrical work shows up in inspections and kills deals.
Only licensed electricians can pull electrical permits in Texas. We handle the permit application, schedule inspections, and make sure everything passes the first time. It adds a few days to the project timeline, but it protects you legally and ensures the work is done to code. Trying to save money by skipping permits costs you more when you have to rip everything out and redo it correctly later.
