Hear from Our Customers
You’re dealing with higher electric bills than most of Texas—about $32 more per month than the state average. That’s $207 going out the door every 30 days, and if your system isn’t running efficiently, you’re paying even more for nothing.
Dallas County sees frequent weather-related outages. Ice storms, high winds, tree limbs hitting lines—Oncor reports over 260 active outages regularly across the area. Your home takes an average of three power surges every month, and most of them start inside your walls, not from the street.
The electrical services you need aren’t just about keeping the lights on. They’re about protecting the $15,000+ in electronics you’ve got plugged in, making sure your family isn’t at risk from outdated wiring, and having backup power when storms roll through. Whether it’s a panel upgrade, surge protection, or a full generator install, the work needs to be done right the first time by a residential electrician who knows Dallas County’s codes and climate.
We’re a family-owned electrical contractor that’s been serving Dallas County and the surrounding areas since the late ’90s. We’re not a franchise. We’re not a call center dispatching whoever’s available.
You work directly with licensed electricians who’ve spent decades troubleshooting the same electrical issues you’re dealing with—outdated panels, surge damage, generator installs for storm season. We hold an A+ rating with the Better Business Bureau and multiple Super Service Awards because we show up on time, explain what’s wrong in plain language, and give you upfront pricing before any work starts.
This is our community. We live here, we raise our families here, and we stand behind every job we complete in Dallas County, TX.
First, we schedule a time that works for you—same-day service is available for urgent issues. When we arrive, we assess the problem, walk you through what’s happening, and explain your options without the upsell routine.
You get a clear, upfront estimate before we touch anything. No surprises, no “we’ll figure it out as we go.” If it’s an emergency repair, we prioritize safety and getting your power restored. If it’s an upgrade or installation, we map out the timeline and what to expect at each step.
Once you approve the work, we get started. We use commercial-grade, UL-listed components that last decades, not the cheapest parts we can source. Every connection is code-compliant, every panel is labeled, and we clean up when we’re done. You’re not left guessing what we did or why—we explain the work in terms that make sense, and we make sure you know how to maintain it going forward.
Ready to get started?
You’re getting more than a quick fix. Every service call includes a safety inspection of the immediate area we’re working in—we’re looking for code violations, fire hazards, or anything that could cause problems down the line.
For Dallas County homeowners, that means checking for outdated aluminum wiring, undersized panels that can’t handle modern electrical loads, and missing surge protection. The 2020 National Electrical Code now requires whole-house surge protection for new construction and major renovations, but most older homes in the area don’t have it. We install it correctly so your HVAC, appliances, and electronics are actually protected.
If you’re adding a backup generator, we size it properly for your home’s load—not just your HVAC, but your refrigerator, medical equipment, and anything else you need during an outage. We handle the permitting, the installation, and the connection to your electrical panel. We also install recessed lighting, upgrade breaker panels, and handle both residential and commercial electrical repairs across Dallas County, TX.
If your panel is over 25 years old, you’re tripping breakers regularly, or you’re adding major appliances or EV chargers, it’s time to evaluate your panel. Most older homes in Dallas County have 100-amp or 150-amp panels, and modern homes need at least 200 amps to handle the load safely.
You’ll also want to replace your panel if you have a Federal Pacific or Zinsco brand—both are known fire hazards and fail to trip when they should. If you see rust, hear buzzing, or smell burning near your panel, shut off the main breaker and call us immediately. Those are signs of serious issues that won’t fix themselves.
A panel replacement typically takes 4-8 hours depending on the size of your home and whether we need to upgrade your meter base. We pull permits, coordinate with Oncor if needed, and make sure everything is up to current Dallas County electrical codes.
A portable generator requires you to be home, haul it outside, run extension cords, and manually start it every time the power goes out. It’s loud, it runs on gasoline you have to store, and it only powers what you plug into it. If you’re not home when the outage hits, nothing happens.
A whole-house standby generator sits outside permanently, connects directly to your electrical panel, and starts automatically within seconds of losing power. It runs on natural gas or propane, so you’re not storing fuel or refilling tanks. It powers your entire home—or specific circuits you prioritize—without you lifting a finger.
For Dallas County, where outages happen frequently due to storms and grid strain, a standby generator makes sense if you work from home, have medical equipment, or just don’t want to deal with spoiled food and no AC during summer outages. We size the unit based on your actual electrical load and install it according to manufacturer specs and local codes.
Power strips only protect what’s plugged into them, and most of them don’t offer real protection—they’re just glorified extension cords. Whole-house surge protection installs at your electrical panel and protects every outlet, appliance, and hardwired device in your home.
Eighty percent of power surges come from inside your home—when your HVAC kicks on, your refrigerator cycles, or a motor starts. Those surges damage electronics over time, shortening their lifespan even if they don’t cause immediate failure. A single lightning strike or utility surge can fry everything in your house that’s plugged in, and your insurance may not cover it.
Whole-house surge protection is now required by code for new construction in Texas. For existing homes in Dallas County, it’s a straightforward install that takes a couple of hours. You’re protecting tens of thousands of dollars in electronics, appliances, and systems for a fraction of the replacement cost.
Most residential standby generator installations take 1-3 days depending on the size of the unit and whether we need to run a new gas line or add a propane tank. We handle the site prep, the concrete pad, the electrical connection, and the startup.
You’ll need permits from Dallas County, and we take care of that. We also coordinate inspections to make sure everything passes the first time. If you’re adding a transfer switch to an existing generator or upgrading from a portable setup, that’s usually a same-day or next-day job.
The generator itself needs to be placed at least five feet from windows, doors, and air intakes per code. We walk your property, find the best location for noise and access, and make sure it meets setback requirements. Once it’s installed, we test it under load, program the settings, and show you how to monitor it.
If your neighbors have power and you don’t, the issue is likely inside your home, not with Oncor. Check your main breaker first—it may have tripped due to an overload or fault. If it won’t reset or immediately trips again, don’t keep forcing it. That’s a sign of a bigger problem.
You could have a damaged service line between the meter and your panel, a failed main breaker, or a problem with your meter base. These aren’t DIY fixes. If you’re in Dallas County and need a 24 hour electrician, we can diagnose the issue and get your power restored safely.
Don’t assume it’s something simple and start pulling breakers or opening your panel if you’re not trained. Electrical panels carry enough voltage to kill you instantly, and even if the main breaker is off, the line side is still live. Call us and let us handle it correctly.
We handle both residential and commercial electrical services across Dallas County, TX. Commercial work includes panel upgrades, lighting retrofits, tenant build-outs, code compliance updates, and emergency repairs for offices, retail spaces, and industrial facilities.
Commercial electrical systems are more complex than residential—they often involve three-phase power, higher voltages, and stricter code requirements. We’re licensed and insured to work on both, and we understand the difference between a quick residential service call and a commercial project that needs to be done after hours to avoid downtime.
If you’re a business owner dealing with flickering lights, tripping breakers, or outdated wiring, we’ll assess your system, provide a detailed estimate, and schedule the work around your operating hours. We also handle generator installations for commercial properties that can’t afford to lose power during outages.
