Hear from Our Customers
Your breaker keeps tripping. Your outlets feel warm to the touch. Your lights flicker when the AC kicks on.
These aren’t just annoyances. They’re warnings that your electrical system can’t handle what you’re asking it to do. And in North Texas, where summer temps push AC units to the limit and winter storms knock out power across entire neighborhoods, you need electrical work that holds up under real pressure.
That’s what you get with a residential electrician in Richland Hills, TX who knows how homes here are wired, what the city inspectors look for, and how to upgrade your system so it actually supports the way you live now. Not how someone lived in 1985. You’ll know your panel can handle your appliances, your outlets are grounded correctly, and your home passes inspection the first time.
No callbacks. No surprises. Just electrical services in Richland Hills, TX that work the way they’re supposed to.
We’ve been serving Richland Hills, TX and the surrounding Mid-Cities area for over 25 years. We were here before Winter Storm Uri knocked out power to millions of homes. We were here helping families get their electricity back on while the grid struggled to recover.
That’s not a sales pitch. It’s context. Because when you hire a local electrician in Richland Hills, TX, you’re not just paying for someone to show up and swap out a breaker. You’re hiring someone who understands what happens when temperatures drop below freezing for days, when everyone’s running space heaters at once, and when outdated electrical panels can’t keep up.
We’re fully licensed and insured. Our team holds current credentials with the Texas Department of Licensing and Regulation. And we’ve earned an A+ rating with the Better Business Bureau and multiple Super Service Awards because we show up, do the work right, and don’t leave until it’s done.
You call or text. We answer. If it’s an emergency, we’re typically on-site within 60 to 90 minutes. If it’s scheduled work, we show up when we say we will.
First visit, we assess what’s going on. Not just the symptom you called about, but the underlying cause. If your breaker trips every time you run the microwave and coffee maker together, that’s a capacity issue. We’ll explain what’s happening, what needs to happen to fix it, and what it costs before we touch anything.
Once you approve the work, we pull permits if needed, install commercial-grade components that meet or exceed code, and make sure everything passes inspection. For panel upgrades, that means coordinating with the city and the utility company so your power gets reconnected without delays. For generator installs, it means handling the gas line hookup, the transfer switch, and the startup certification.
You get a detailed invoice, a warranty that actually covers the work, and a system that does what it’s supposed to do. If something doesn’t work right, we come back and make it right.
Ready to get started?
Most homes in Richland Hills, TX were built decades ago with 100-amp panels. That was fine when the biggest electrical draw was a window AC unit and a TV. Now you’ve got central air, a tankless water heater, multiple computers, smart home devices, and kitchen appliances that pull serious power. Your panel wasn’t designed for that load.
We upgrade panels to 200-amp or 400-amp systems using NEMA-rated components that handle modern electrical demands. We install whole-house surge protection so one lightning strike doesn’t fry your electronics. We add dedicated circuits for high-draw appliances so your breaker stops tripping every time you use the dryer.
For backup power, we install Generac and other standby generators that kick on automatically when the grid goes down. That includes the transfer switch, the gas line connection, all permits, and the final inspection. You don’t have to drag a portable generator out of the garage and run extension cords through your house. The lights just stay on.
We also handle recessed lighting, outlet installations, safety inspections, and emergency electrical repairs. If it involves wiring, breakers, or power, we do it. And we do it to code so it passes inspection the first time.
We offer 24 hour electrician service in Richland Hills, TX and typically arrive within 60 to 90 minutes for true emergencies. That includes situations like sparking outlets, burning smells near your panel, or complete power loss that’s not related to a grid outage.
When you call, we’ll ask a few questions to determine if it’s something that needs immediate attention or if it can wait until morning. If your breaker won’t reset and half your house is without power, that’s urgent. If you want to add an outlet in your kitchen, that can be scheduled.
Emergency rates are higher because we’re pulling someone off another job or calling them in after hours. But if your electrical system is creating a fire hazard or leaving you without power, waiting isn’t really an option. We’ll give you the cost upfront so you can decide if you want us to come out now or wait until regular hours.
If your breakers trip regularly, your panel is warm to the touch, or you see rust or scorch marks inside the panel box, yes. Those are signs your system is overloaded or failing. Ignoring them doesn’t make the problem go away. It makes it worse.
Most homes in Richland Hills, TX that are 40+ years old have panels that can’t handle today’s electrical load. You’re running more devices, bigger appliances, and higher-draw systems than the original panel was rated for. When you exceed that capacity, breakers trip. When breakers fail, wires overheat. That’s how electrical fires start.
A panel upgrade brings your system up to current code, gives you room to add circuits for new appliances, and eliminates the constant breaker trips. It also makes your home easier to sell because buyers and inspectors won’t flag your electrical system as a liability. The work requires a permit and a city inspection, but we handle all of that so you don’t have to.
A portable generator sits in your garage until the power goes out. Then you wheel it outside, run extension cords into your house, and manually start it. It’ll power a few appliances, but not your whole house. And you have to be home to set it up.
A standby generator is permanently installed outside your home with a direct connection to your electrical panel and your gas line. When the power goes out, it detects the outage and starts automatically within seconds. Your lights, AC, refrigerator, and everything else stay on without you lifting a finger. You don’t even need to be home.
Standby generators cost more upfront because they require professional installation, a transfer switch, gas line work, permits, and inspections. But they’re the only option if you want true backup power that works whether you’re home or not. We install Generac systems and handle the entire process from permits to startup certification so your generator is ready the next time a storm knocks out power in Richland Hills, TX.
It depends on what you need done. A simple outlet replacement might run $150 to $300. A full panel upgrade typically costs $2,500 to $5,000 depending on the amperage and how much rewiring is involved. Generator installations range from $5,000 to $15,000 based on the size and fuel source.
We give you upfront pricing before we start any work. You’ll know exactly what it costs, what’s included, and how long it’ll take. No surprises, no hidden fees, no “we found something else while we were in there” upsells unless it’s a legitimate safety issue we need to address.
Emergency service costs more because we’re responding outside normal hours. But for scheduled work, our rates are competitive with other licensed electricians in the area. The difference is we use commercial-grade components that last longer, we pull permits so your work is legal and insured, and we warranty our installations so you’re covered if something goes wrong.
Legally, no. Texas requires a licensed electrician to perform most electrical work, especially anything involving your panel, new circuits, or work that requires a permit. If you do it yourself and something goes wrong, your homeowner’s insurance can deny your claim. And if you try to sell your house later, unpermitted electrical work will show up during inspection and kill your sale.
Beyond the legal issues, electrical work is dangerous if you don’t know what you’re doing. You’re working with live voltage that can kill you or start a fire. Even if you think you’ve turned off the power, you might be wrong. We’ve seen DIY electrical jobs that looked fine on the surface but were wired incorrectly and created fire hazards inside the walls.
Hiring a residential electrician in Richland Hills, TX costs more upfront, but it’s cheaper than dealing with an electrical fire, a failed home inspection, or an insurance claim that gets denied because you didn’t use a licensed contractor. We pull permits, use code-compliant materials, and make sure your work passes inspection so you don’t have problems down the road.
Check your main breaker first. It’s the large breaker at the top of your panel, usually labeled “main” and rated for 100, 150, or 200 amps. If it’s tripped, flip it off completely, then back on. If it trips again immediately, you have a short or an overload somewhere in your system. Don’t keep resetting it.
If your main breaker is on but you still don’t have power, the problem is likely between the utility’s connection and your panel. That could be a failed meter base, a damaged service line, or a problem with the connection at the weatherhead. You’ll need to call your utility company first to rule out issues on their side of the meter.
If the utility says everything is fine on their end, call us. We’ll diagnose whether the issue is in your meter base, your main breaker, or your service entrance wiring. These aren’t DIY repairs. You’re dealing with the full voltage coming into your home before it hits any breakers. That’s 240 volts and enough amperage to kill you instantly. Let a licensed electrician handle it.
